Fuji Xerox ApeosPort-IV C5575 User Manual page 100

3 Copy
2
Select [Target Area Color].
3
Select any color.
[Non-target Area Color] Screen
3
This screen allows you to select the color to be used in place of the colors other than the
selected source colors. You can select one color from seven preset and six custom options.
For information on how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom Colors" in the
Administrator Guide.
1
Select [Dual Color].
2
Select [Non-target Area Color].
3
Select any color.
[Output Color - Color] Screen
This screen allows you to specify the color to be used for single-color copying regardless of
the colors in the original document.
You can select one color from six preset and six custom options for [Single Color].
100