Copy Output (Specifying Finishing Options) - Fuji Xerox ApeosPort-IV C5575 User Manual

3 Copy
Separator & Handout
Allows you to select the paper tray to be used for the separators and handouts.
Select [More] to display the [Paper Supply - Separator & Handout] screen on which you can
select a tray.
Note
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.95).
Handout Tray
Allows you to select the paper tray to be used for the handouts.
Select [More] to display the [Paper Supply - Handout] screen on which you can select a tray.
Note
3
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.95).

Copy Output (Specifying Finishing Options)

This feature allows you to select finishing options.
Note
If the finisher is installed, each set of copies can be stapled, and then output.
When the Hole Punch Kit for Finisher-B1, the Finisher-C1, or the Finisher-C1 with Booklet
Maker is installed, copies can be punched.
1
Select [Copy Output].
2
Select any option.
Auto
Copies are collated when the originals are loaded in the document feeder.
Copies are collated when originals are loaded on the document glass and any of the
following features is used: 2 Sided Book Copying, Covers, [Blank Separators & Handouts] or
150
• When you use the bypass tray, select [Bypass] on the [Paper Supply - Separator & Handout] screen.
Select an option other than [Auto Detect] for [Paper Size] on the [Tray 5] screen.
• For [Separator & Handout], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator &
Handout] at the same time.
• When you use the bypass tray, select [Bypass] on the [Paper Supply - Handout] screen. Select an
option other than [Auto Detect] for [Paper Size] on the [Tray 5] screen.
• For [Handout Tray], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Handout Tray] at
the same time.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.