Security - DFI RM641 User Manual

Security

InsydeH20 Setup Utility
Main Advanced Security Boot
Current TPM Device <TPM 2.0 >
TPM State Not Installed
TPM Availability <Available>
TPM Operation <No Operation>
Clear TPM [ ]
Supervisor Password Not installed
Set Supervisor Password
Set All Hdd Password
Set All Master Hdd Password
Storage Password Setup Page

F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
TPM Availability
Set the TPM availability.
TPM Operation
Enable or disable the storage and endorsement hierarchy. This option will
automatically return to No-Operation.
Clear TPM
Remove all TPM context associated with a specific owner.
Set Supervisor Password
Set the supervisor's password and the length of the password must be greater than
one character.
Set All Hdd Password
Set all HDD password and suggest the length of password greater than one character.
This item can be displayed when any security mode of HDD is not Lock.
Set All Master Hdd Password
Set all master HDD password and suggest the length of password greater than one
character. This item can be displayed when any security mode of HDD is not Lock.
Chapter 6 BIOS Setup
Rev. 5.0
Exit
When Hidden, don't ex-
poses TPM to 0
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 6
Storage Password Setup Page
This section configures the status control when the power failure occurs.
Main Advanced Security
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
Set All Hdd Password
Set All Master Hdd Password
Storage Password Setup Page

F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Storage Password Setup Page
This option allows you to set up storage password.
Main Advanced Security
Storage Password Setup
ST3160318AS

↑ and ↓ to change option. ENTER to select an option. ESC to exit.
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
ST3160318AS (Device Name)
This option allowes you to go to Storage Password List Help.
39
InsydeH20 Setup Utility Rev. 5.0
Boot Exit
Install or Change the pass-
<TPM 2.0 >
word and the length of
Not Installed
password must be greater
<Available>
than one character.
<No Operation>
[X]
Not installed
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

InsydeH20 Setup Utility Rev. 5.0
Boot Exit
Storage Password Setup
Page
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com