Table of Contents
Advertisement
Security
This section configures the Trusted Platform Module (TPM) function and the HDD security.
TPM Availability
Show or hide TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
• No Operation: No changes to the current state.
• Disable: Disable and deactivate TPM.
• Enable: Enable and activate TPM.
Clear TPM
Remove all TPM ownership contents.
Chapter 7 BIOS Setup
Chapter 7
Set Supervisor Password
Set the administrative password for entering the BIOS utility or upon the entering of the
power-on self-test (POST) process. The length of the password must be greater than 1
character and less than or equal to 10 characters.
Power-on Password
If you select to set the supervisor password, this option will be shown. Enable or disable
the system to require password at boot.
40
www.dfi.com
Advertisement
Table of Contents
