Re-Inserting The Staple Cartridge Into The Cartridge Unit - Fuji Xerox Color 550 Administrator's Manual

Re-inserting the Staple Cartridge into the Cartridge Unit

This section describes how to re-insert the staple cartridge to the cartridge unit when it
has been inserted incorrectly or removed accidentally.
CAUTION
Be careful not to get injured when removing jammed staples.
1
Open the staple cartridge cover as shown in
the illustration, and remove the jammed
staple.
CAUTION
Be careful not to get injured when
removing jammed staples.
2
Look for the lever on the rear side of the unit.
3
Move the lever in the direction indicated by
the arrow in the illustration.
Important • Be careful when removing jammed
4
Turn the unit upright while holding the lever,
and then remove the staple cartridge from
the cartridge unit.
staples to avoid hurting your fingers and
nails.

Re-inserting the Staple Cartridge into the Cartridge Unit

7
267