Frame Type - Fuji Xerox Color 550 Administrator's Manual

5 Tools
TCP/IP - Subnet Mask
This option lets you modify the subnet mask for printing with TCP/IP over Ethernet.
Note
TCP/IP - Gateway Address
Use this option to set the gateway address for printing with TCP/IP. If your network uses a
gateway, you must change the default to a correct gateway address for your network.
Note

Frame Type

Select [Auto] if your network environment is mixed or if you do not know the frame type of the
network. If you know the frame type of the network to which the print server is attached,
select it.
5
150
• Enter the IP address in the format "xxx.xxx.xxx.xxx". The "xxx" should be a numeric value in
the range from 0 to 255. However, the range between 224.XXX.XXX.XXX through
255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
• Specify the subnet mask by a combination of the numbers 0, 128, 192, 224, 240, 248, 252,
254, and 255. However, you cannot use 0 between non-zero values.
• If you do not want to set the gateway address, enter "0.0.0.0".
• Enter the IP address in the format "xxx.xxx.xxx.xxx". The "xxx" should be a numeric value in
the range from 0 to 255. However, the range between 224.XXX.XXX.XXX through
255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
• If you do not want to set the gateway address, enter "0.0.0.0".