Screen/Button Settings - Fuji Xerox Color 550 Administrator's Manual

5 Tools
Stored Programming Tone
Set the volume to be sounded while a stored program is being registered.
You can select from [Soft], [Normal], and [Loud].
This tone cannot be disabled.
Stored Programming Complete Tone
Set the volume to be sounded when the call of a stored programming registered is
completed.
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].

Screen/Button Settings

Set screens and buttons.
Screen Default
Set the screen displayed after powering on the machine or canceling the Energy Saver mode.
For more information on the setting procedure, refer to "Customizing the Control Panel" (P.17).
Screen After Auto Clear
Set the screen displayed after Auto Clear.
For more information on the setting procedure, refer to "Setting the Screen After Auto Clear" (P.18).
5
Auto Display of Login Screen
When the Authentication feature is enabled on the machine, set whether or not to
automatically display the login screen after turning on the machine or canceling the Energy
Saver mode.
Custom Buttons 1 to 3
You can assign services such as Copy and Stored Programming to the custom buttons on the
control panel: Custom Button 1 to Custom Button 3.
To leave a feature unassigned, select [(Not Set)].
Note
For more information, refer to "Assigning Services to <Custom> Buttons" (P.19).
Services Home
This feature cannot be used on this machine.
Services Home - Additional Features
This feature cannot be used on this machine.
Job Type on Job Status screen
Select the default job types to be shown on the [Completed Jobs] screen under the [Job
Status] screen that is displayed when the <Job Status> button on the control panel is
pressed.
Select from [All Jobs], [Printer & Print from Folder Jobs] and [Scan, Fax, & Internet Fax Jobs].
The [Job Flow & File Transfer] option cannot be used on this machine.
112
• Copy service is assigned to [Custom Button 1] and Review is assigned to [Custom Button 3]
by factory default.