Configuration For Authentication; Enabling Authentication - Fuji Xerox Color 550 Administrator's Manual

6 Authentication and Accounting Features

Configuration for Authentication

This section describes the settings to use the Authentication feature on the machine.
The following shows the reference section for each procedure.

Enabling Authentication

When [Login to Local Accounts] is Selected
Perform the following procedures to use local authentication.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note
6
3
Select [Tools] on the [Services Home] screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [Login Type].
7
Select [Login to Local Accounts], and then select [Save].
Note
For more information on the authentication method, refer to "Login Type" (P.159).
8
Select [Access Control].
9
Select [Service Access].
10
Select [Unlocked] for the required services to permit users unlimited access, and then
select [Save].
11
After you finish settings for each feature, select [Close].
12
To disable button operations on the control panel, select [Device Access] and select
[Locked], and then select [Save] and then [Close].
13
Select [Passcode Entry from Control Panel] under [Passcode Policy].
Select [On] to prompt users to enter their passcode, or select [Off] if the passcode
entry is not required, and then select [Save] and then [Close].
14
Select [Create/View User Accounts].
15
Select a user displayed as [<Available>], and then select [Create/Delete].
174
Enabling Authentication ...........................................................................................................174
Changing the Default Authorization Group Settings................................................................175
Creating an Authorization Group..............................................................................................176
• The default user ID is "11111".
• The default passcode is "x-admin".
• When [Login to Local Accounts] is selected, settings must be made to enable printing via a
print server. For details on how to make these settings, refer to "Login Type" (P.159).