Disassembly; Adjustment Cover; Hood, Filter Piece, And Lens Cove - Hitachi DZ-MV350A Service Manual

Disassembly and Reassembly > Disassembly

5-3 Disassembly

Information:
Numbers in figures are step numbers in disassemble procedure, and letters in brackets [
the types of screw. Letters in brackets ( ) show the neme of parts.
(1) Adjustment Cover (Fig. 5-3-1)
1) Open the LCD monitor.
2) Insert a fine-tipped flat-bladed screwdriver
(b) into groove of adjustment cover (a), and
remove the adjustment cover in the
direction of the arrow. being careful not to
scratch the adjustment cover and L case (c)
with screwdriver at this time.
(2) Hood, Filter Piece, and Lens Cover
(Fig. 5-3-2)
1) Turn the hood (a) in the direction of the
arrow to remove it.
2) Remove three screws [A], and then remove
the filter piece (b), being careful not to
scratch the lens surface with screwdriver at
this time.
3) Remove the lens cover (c) in the direction of
the arrow.
(a) Adjustment Cover
(b) Screwdriver
(c) L Case
2
(a)
(b)
1
Fig. 5-3-1 Adjustment Cover
(a) Hood
(b) Filter Piece
(c) Lens Cover
(b)
1
2 [A]
(a)
[A] M1.7×4 (Black)
Fig. 5-3-2 Hood, Filter Piece, and Lens Cover
5 - 3
] show
(c)
(c)
3