Hitachi DZ-MV350A Service Manual page 89

Adjustment > Creating Reference Data
6) Choose the radio button of corresponding model name in
MODEL SELECT screen.
7) Click the ENTER button in MODEL SELECT screen,
and then proceed with the SETUP MENU screen.
Refer to next item for subsequent operations.
If there is an error in model selection, the FILE
HANDLE ERROR dialog will appear. Click the OK
button, and then choose the correct model.
Note:
If the FILE HANDLE ERROR dialog appears when the
correct model has been chosen, obtain (download) the
newest adjustment program, and then start over again.
If the FILE HANDLE ERROR dialog still appears with
the newest adjustment program, check with the factory.
(2) Termination
1) Click the RETURN button on MENU screen of
program to return to the MODEL SELECT screen.
2) Click the EXIT button on the MODEL SELECT screen.
Information:
If PC does not accept any operation during creation of
reference data, or the program halts, perform the
following procedure:
1) Set the power switch of DVD video camera/recorder
to "POWER OFF".
2) Turn off the DC power supply for DSP-R jig.
3) Simultaneously press the Ctrl, Alt and Delete keys
on PC keyboard to restart the PC.
4) After the PC restarts, restart the program.
MODEL SELECT screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL SELECT
× × × ×
× × × ×
× × × ×
× × × ×
6
PLEASE SELECT MODEL
SETUP MENU screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
SETUP MENU
FILE HANDLE ERROR dialog
ERROR
!
File hundle error. [SYMBOL FILE]
6 - 8
7
ENTER EXIT
Matrix
White Balance
White Balance Abs
EXECUTE RETURN
OK