Table of Contents
Advertisement
Troubleshooting > Checking Versions of Firmware and Updating
During updating, the screens showing that each
firmware program is being updated (Figs. 4-6-3, 4-6-4, 4-
6-5), followed by the screen showing that updating is
complete (Fig. 4-6-6), will appear.
However, not all firmware programs need updating
every time. No screen will appear for the firmware
programs that do not require updating.
6) When all required updating is complete, the screen for
verifying the version of updated firmware will appear,
and the updated firmware will be displayed in red (see
Fig. 4-6-7).
7) Set the power switch to "POWER OFF", and then
remove the disc for updating to complete updating.
Fig. 4-6-3 Updating Screen (System)
Fig. 4-6-6 Updating Complete Screen
Fig. 4-6-7 Screen for Verifying the
4 - 27
Firmware Update
Updating system.
Do not turn off power.
Firmware Update
Updating drive (Main).
Please wait about 2 minutes.
Do not turn off power.
Fig. 4-6-4 Updating Screen
(Drive Main)
Firmware Update
Updating drive (Core).
Please wait about 2 minutes.
Do not turn off power.
Fig. 4-6-5 Updating Screen
(Drive Core)
Firmware Update
Firmware updated.
Firmware Update
Model: DZ-MV3-NTSC
System: Ver. ×.××
Drive (Main): ××××.××.××.REV
Drive (Core): ××××.××.××.REV
Turn off power
Version of Updated
Advertisement
Table of Contents
Troubleshooting
