Disassembly and Reassembly > Disassembly
(9)
Disc Cover (Figs. 5-3-10, 5-3-11)
1) Move the lock arm (b) in the direction of the arrow to open the disc cover (a).
2) Open the card slot cover (c).
3) Disconnect the flat cable (e) from MAN circuit board (d).
4) Remove four screws [D].
5) Remove the disc cover in the direction of the arrow: Be careful not to damage the flat cable (e)
that extends from the disc cover.
Procedure and caution for reassembly
1) Reinstall the disc cover so that the hinge
cover. (Fig. 5-3-11)
2) Pass the flat cable (e) extending from the disc cover through the gap between frame (g) and R
case (h), and then connect it to the MAN circuit board (d). (Fig. 5-3-11)
(b)
(a)
2
(c)
Fig. 5-3-10 Disc Cover
[D] M1.6×2.5 (Black)
of R case fits into portion
1
3-1
3-2
(d)
3
(g)
(d)
(e)
(h)
5 - 9
2
(a) Disc Cover
(b) Lock Arm
(c) Card Slot Cover
(d) MAN Circuit Board
(e) Flat Cable
(f) Hinge of R Case
(g) Frame
(h) R Case
(j) Disc Drive Unit
(k) Loader
2
1
(a)
(f)
(e)
(k)
(j)
(f)
(a)
4 [D]
Fig. 5-3-11 Disc Cover
at the inside top of disc
5
(c)
4 [D]