Table of Contents
Advertisement
General Description > Inserting Disc
(3) Replacing disc in round DVD holder
1
Open SIDE A of the Round DVD Holder, and replace the disc in
the holder with the SIDE A mark or label sur face facing up,
taking care not to touch the disc sur face.
2
Close SIDE A of the Round DVD Holder, and push it to lock the
release levers at positions (3).
(4) When the hinge of rpund DVD holder comes off
1
Push the hi nged por tion of the holder piece marked SIDE A with
thumb and middle finger , and warp it in the direction of arrows (4).
2
Fit the hinged por tion of the other holder piece into the war ped
hinge por t ion.
:
Note
•
Handle the disc carefully so that no scratch, dirt, fingerprint or dust adheres
to the recording/playback surface.
•
When not using the Round DVD Holder, store it in case:
Do not leave a bare holder as is.
•
Be careful of drop or impact: If you drop the Round DVD Holder, the disc may
pop out.
•
Do not subject the Round DVD Holder to force.
OPEN marks
SIDE A mar k s ide or
Label surface
SIDE A mark side
2 - 13
3
SIDE A
mark
3
Hinged portions
4
Approx. 90˚
Advertisement
Table of Contents
Troubleshooting
