Lcd - Hitachi DZ-MV350A Service Manual

Adjustment > Adjustment Procedure

6-4-11 LCD

Note:
1) Perform LCD only after replacing the MAN circuit board or 2.5 LCD Unit, or executing "Data
Initialize".
2) Neither light box nor chart is needed for LCD adjustment.
Before performing any adjustments for LCD, be sure to shift the DVD video camera/recorder to the
test mode using the procedure below, and then display the LCD ADJUSTMENT MENU.
Procedure:
1) Check LCD on the ADJUST MENU screen.
2) Click the EXECUTE button on ADJUST MENU screen
to shift the DVD video camera/recorder to the test mode.
Progress of the shift can be confirmed from the bar
displayed in the dialog.
3) When the DVD video camera/recorder has shifted to the
test mode, the LCD screen will be black and white (see
Fig. 6-4-8), and the LCD ADJUSTMENT MENU screen
will appear on the PC monitor screen.
Fig. 6-4-8 LCD Monitor Screen
ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
ADJUST MENU
PLEASE SELECT ADJUST
LCD ADJUSTMENT INITIALIZE
PLEASE WAIT A MOMENT
LCD ADJUSTMENT MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
LCD ADJUSTMENT MENU
PLEASE SELECT ADJUST
6 - 32
××××
DATA INITIALIZE
VIDEO LEVEL
BURST LEVEL
SAMPLING PULSE
AUTO FUCUS
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
STABILIZER
SPOT NOISE
1
LCD
EVF
2
EXECUTE RETURN
LCD ADJUSTMENT MENU
PLL
BRIGHT
CONTRAST
WHITE BALANCE
EXECUTE
RETURN