Hide thumbs Also See for DZ-MV350A:
Table of Contents

Advertisement

Adjustment > Adjustment Procedure

6-4-12 EVF

Note:
1) Perform EVF only after replacing IC3701 and its peripheral components, MAIN circuit board or
EVF unit, or executing "DATA Initialize".
2) Neither light box nor chart is needed for EVF adjustment.
Before performing any adjustments for EVF, be sure to shift the DVD video camera/recorder to the
test mode using the procedure below, and then display the EVF ADJUSTMENT MENU.
Procedure:
1) Open the LCD monitor, and then turn it 180° so that
the LCD screen faces the same direction as the lens.
2) Check EVF on the ADJUST MENU screen.
3) Click the EXECUTE button on ADJUST MENU screen
to shift the DVD video camera/recorder to the test mode.
Progress of the shift can be confirmed from the bar
displayed in the dialog.
4) When the DVD video camera/recorder has shifted to the
test mode, the viewfinder screen will be black and white
(see Fig. 6-4-12), and the EVF ADJUSTMENT MENU
will appear on the PC monitor screen.
Fig. 6-4-12 Viewfinder Screen
ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
ADJUST MENU
PLEASE SELECT ADJUST
EVF ADJUSTMENT INITIALIZE
PLEASE WAIT A MOMENT
EVF ADJUSTMENT MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
EVF ADJUSTMENT MENU
PLEASE SELECT ADJUST
6 - 38
××××
DATA INITIALIZE
VIDEO LEVEL
BURST LEVEL
SAMPLING PULSE
AUTO FUCUS
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
STABILIZER
SPOT NOISE
LCD
2
EVF
3
EXECUTE
RETURN
EVF ADJUSTMENT MENU
PLL
BRIGHT
CONTRAST
WHITE BALANCE
EXECUTE
RETURN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dz-mv350a(k)

Table of Contents