Matrix - Hitachi DZ-MV350A Service Manual

Adjustment > Adjustment Procedure

6-4-7 Matrix

Preparation:
Point at light box without chart, filling the screen.
Prepare the C12 light balancing filter (set-up rings): Attach
it during adjustment.
Procedure:
1) Check MATRIX on the ADJUST MENU screen.
2) Click the EXECUTE button on ADJUST MENU screen
to start adjustment.
All adjustment in progress can be confirmed with the
bar displayed in the dialog.
3) The ATTACH THE FILTER dialog will appear during
setup.
Attach the C12 light balancing filter over the lens of
DVD video camera/recorder, and then click the OK
button in ATTACH THE FILTER dialog.
4) The REMOVE THE FILTER dialog will appear again
during setup.
Remove the C12 light balancing filter from the lens of
DVD video camera/recorder, and then click the OK
button in REMOVE THE FILTER dialog.
After that, the ATTACH THE FILTER dialog and
REMOVE THE FILTER dialog may occasionally appear:
Reattach the C12 light balancing filter and remove it
each time.
5) When adjustment is complete, the ADJUSTMENT
FINISHED dialog will appear: Click the OK button in
dialog to restore the ADJUST MENU screen.
ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
ADJUST MENU
PLEASE SELECT ADJUST
MATRIX
PLEASE WAIT A MOMENT
ATTACH THE FILTER dialog
CHECK
! Attach The Filter.
REMOVE THE FILTER dialog
CHECK
! Remove The Filter.
ADJUSTMENT FINISHED dialog
FINISHED
ADJUSTMENT FINISHED.
6 - 27
××××
DATA INITIALIZE
VIDEO LEVEL
BURST LEVEL
SAMPLING PULSE
AUTO FUCUS
AUTO IRIS CONTROL
1
MATRIX
CHROMA GAIN
STABILIZER
SPOT NOISE
LCD
EVF
2
EXECUTE RETURN
3
OK
4
OK
5
OK