Chapter 2 Disassembly; Before Starting Disassembly - Hitachi DIGITAL 8 VM-D965LE Service Manual

CHAPTER 2 DISASSEMBLY
1. BEFORE STARTING DISASSEMBLY
* Top Cover [ltem 2.2]
* Parts on the UH mechanism [Refer to service manual of the UH mechanism]
Note: After dismantling or resembling the cassette lid or top cover, return the mechanism to loading stop status.
(3) Dismantle each component according to "1.1 Disassembly Procedure".
(1) Release the lock of the connector on the left and right simultaneously.
(2) Pull out the flat cable.
1.1 Disassembly Procedure
Note: Dismantle or reassemble these parts in loading
anes
PSW Circuit Board
stop status; after finishing, return the mechanism
acl over, : : "
' h f Fronk Covet
oeLon Unit
to loading stop status.
Assembly [2.1] Front Cover [2.3]
CVF Circuit Board,
eis Backlight Unit,
[2.10]
LCD Case-U, Fulcrum [2.5] L-Case [2.5]
LCD Block [2.2]
Backlight, Board [2.7 Pace
LCD Module, 2.7] VCA Circuit Board,
LCD Case-B [2.9] chet i
[2.7]
Camera Chassis Lens Frame, Lens,
es |
Assembly [2.6] SE Circuit Board,
BUD Sos 6) Power Terminal
Unit [2.6]
VCR Chassis
Cassette Lid
Assembly,
TW/PW Switch,
Top Cover [2.2]
Jack Unit,
Hand Strap,
(Note)
Rear Cover [2.6]
R-Case [2.8]
ee |