MV Agusta 2008 F4 312RR 1078 Workshop Manual page 95

Crankcase
Verify with a thick meter that the motor shaft has an
axial play of 0,2 mm as regards the bench bearings.
In case there should be different values contact the
manufacturer.
D
Reassemble the bearing on the inferior semi carter
with the locks facing each other and turned inward the
bedplate.
Be sure that the centering bushes are installed on the
inferior semi carter. Spread a layer of the 1215
THREEBOND type garnish on the stroke points of the
two semi carters.
Couple the two semi carters carefully beating them
with a plastic hammer until completely closed.
- 33 -