MV Agusta 2008 F4 312RR 1078 Workshop Manual page 54

Assembling the valve.
C
Insert in the order of:
A)Insert the two coaxial springs
B)Slide the semi cones into the superior disk slot and
thus place the disk on the springs
C)Assemble the head on the disassembling valve tool
n° 800094796 and compress the spring with tool
800095180 until the semi cones are inserted.
D)Using a rubber hammer strike a slight blow on the
valve so as to place the semi cones.
Before placing the semi cones be sure
NOTE
that the head is not resting on a plane in
order to avoid distorting the valve. Place it
onto two bases which allow the valve to
move.
E)Insert the tablet of the correct thickness and lubrica-
te its surface
F) Make sure it easily turns in its slot
G)Insert the cup after lubricating the slot
Insert the cylinder head as described in the paragraph
"Head assay assembly".
Cylinder kit
- 24 -
800095180