Table of Contents
Advertisement
Crankcase
Clutch overhauling
Check the rod for straightness and wear.
Check the friction plates for wear. The standard thick-
D
ness is 3 mm
Maximum allowed wear limit : 2,8 mm.
No signs of burning, grooves or other damages are
allowed.
Replace the whole plates group even if only one is
damaged.
Put the plate on a table and check the deformation.
Measure the length "L" of the springs with a gauge.
The serviceability limit is 39 mm.
Replace the springs exceeding the service limit
- 7 -
Hide quick links:
Advertisement
Chapters
Table of Contents
