MV Agusta 2008 F4 312RR 1078 Workshop Manual page 66

Crankcase
The clutch release occurs using a postponing return
group composed of a small thrust piston placed on the
left side of the motor and operated by a hydraulic sys-
tem.
D
This small piston pushes a command rod which makes
the disk pusher plate function.
Clutch disassembly
In order to carry out this function the following special
tool is necessary:
Utensil n° 800079015
Remove the 11 screws which fasten the clutch cap to
the bedplate.
Remove the clutch cap together with the gasket which
will be substituted during reassembly.
800079015
Remove the 6 disk pusher plate (2) tightening screws
(1) together with the relative springs.
2
Remove the disk pusher plate.
1
- 4 -