MV Agusta 2008 F4 312RR 1078 Workshop Manual page 42

Cylinder kit
Fit the gasket with the inscriptions facing up and the
protrusion towards the march gear.
Insert the centering bushes between the head and the
cylinder. Insert the washers on the encarcement if
35 N•m
C
necessary with the help of a screw driver to guide them
onto the internal encarcements.
Lubricate with antibinding grease of the HSC MOLI-
KOTE type only on the nut threads.
Do not apply grease on the encarcement threads,
which must be well cleaned and degreased
Screw the bolts with a brugle key and press them at 35
N·m.
50 N•m
Tighten the bolts beginning with the internal ones
towards the external ones following the outline indica-
ted in the figure at 50 N·m.
Retrieve the distribution chain.
Insert the fixed sliding block with its screws and, after
8 N•m
having carefully degreased it, tighten it at a torque of 8
N·m. with MEDIUM THREAD BLOCKER.
- 12 -