MV Agusta 2008 F4 312RR 1078 Workshop Manual page 110

Remove the pick-up from the phonic wheel.
Alternator
- Removal:
F
Working on the left side of the motor, remove the
three alternators and the stiffening stirrup tightening
nuts.
Slide the alternator out being careful not to let the
rubber torsions fall .
- Assembly:
Grease the torsions and O-Rings.
Insert the pallets together with the torsions.
Manually bring the screws together, thus tighten
them at 25 Nm.
Starter motor
- Removal:
Remove the two tightening screws.
Slide the starter motor out, being careful not to dam-
age the O-Rings on the shaft.
- Assembly:
Reassemble the motor on the bedplate.
Manually bring the two screws together, thus tighten
them at the prescribed coupling.
Electrical components
25 N•m
- 4 -