Use the tool no. 800079015 to lock the clutch bell, then
tighten the nut to 140 Nm.
Notice: three types of packed disks are used; to
assemble them, see the diagram below.
First fit in one of the two disks (1) with the larger fric-
tion cells and a plain disk (3).
Fit in the spring holder (5), the spring (6) with the nar-
rower diameter facing the engine and the packed disk
with the larger inner diameter (4); then, fit in the other
seven packed disks (2), alternating them with the plain
disks (3), and lastly fit in the last outer disk (1).
Crankcase
140 N•m
- 9 -
D