Table of Contents
Advertisement
Remove the clutch and the gear as described in the
relative paragraphs.
Remove the seeger and the oil pump gearing.
Remove the 3 tightening screws.
E
Push the oil pump shaft from the gear end and slide the
oil pump body from the clutch end.
To disassemble the oil pump remove the external
screws.
Separate the various components as indicated in the
figure.
Visually check the components to be
sure that there are no lines of deforma-
tions.
In case one of the pieces should be
damaged, substitute it with a new one.
Reassemble the oil pump in the reverse
order of assembly.
Tighten the 3 screws at 8 N·m with
MEDIUM THREAD BLOCKER carefully
degreasing them before reassembly.
Lubrication
- 4 -
Hide quick links:
Advertisement
Chapters
Table of Contents
