All the gears must be inserted and unin-
serted without stumbling.
In case of stumbling, verify that the axial
play has been correctly restored.
D
With a thick meter verify that each gear-
ing, once inserted presents a fork-pit
play equal to 0,2 ÷ 0,3 mm placing it on
both ends of the coupling.
The fork must be free.
Assemble the gasket on the internal
end.
Before inserting the gear group into the bedplate veri-
fy that a gear is inserted so as not to damage the neu-
tral indicator switch.
Do not insert the gear group in neutral into
the bedplate.
Insert the clutch rod.
Crankcase
- 18 -