Normal Messages - Konica Minolta magicolor 7450 Service Manual

Hide thumbs Also See for magicolor 7450:
Table of Contents

Advertisement

8. Description of the Control Panel
8.1.3

Normal messages

The Basic Screen is displayed after warm-up has been completed.
The "READY LED
Display
LCD 1 Printer mode is displayed. (Normally, [READY] is displayed.)
LCD 2
The message is displayed. (Normally, no message is displayed.)
LCD 3
Key guidance is displayed.
• Normally [MENU to enter] is displayed.
LCD 4
When the MENU key is pressed, the panel displays the MENU screen.
• When a WARNING message is displayed, [
When the Down key
State
Message
Key guidance
A. Toner-remaining level gauge
• The amount of each color of toner remaining is graphed in 10% increments (11 scales.)
However, it's not displayed during the following states:
- Operator Call
- Service Call
- Menu
- Help menu
- BOOT message
- When the toner remaining amount is not determined immediately after start-up.
80
" lights up while the message is displayed.
is pressed, the panel displays the HELP screen.
READY
to enter
Field Service Ver. 1.0 May 2006
Description
for help] is also displayed.
YMCK
Toner-remaining amount
100% (Full)
Toner-remaining amount
0% (Empty)
YMCK
Toner color display
Toner-remaining
level gauge
4138F3E007DA

Advertisement

Table of Contents
loading

Table of Contents