Figure 31-32 Name Command Example; Figure 31-33 Speed-Duplex Command Example - ZyXEL Communications GS-3012 User Manual

GS-3012/GS-3012F User's Guide
An example is shown next.
Enable ports one, three, four and five for configuration.
Set a name for the interfaces.
ras(config)# interface port-channel 1,3-5
ras(config-interface)# name Test
31.8.14 speed-duplex
Syntax:
speed-duplex <auto|10-half|10-full|100-half|100-full|1000-full>
where
<auto|10-
half|10-
full|100-
half|100-
full|1000-
full>
An example is shown next.
Enable ports one, three, four and five for configuration.
Set the speed to 10 Mbps in half duplex mode.
ras(config)# interface port-channel 1,3-5
ras(config-interface)# speed-duplex 10-half
31-16

Figure 31-32 name Command Example

Sets the duplex mode (half, full) and speed (10/100/1000 Mbps) of the
connection on the interface. Selecting auto (auto-negotiation) makes one port
able to negotiate with a peer automatically to obtain the connection speed
and duplex mode that both ends support.

Figure 31-33 speed-duplex Command Example

Command Examples