Example No Commands; No Mirror-Port; No Trunk; Figure 141 No Mirror-Port Command Example - ZyXEL Communications GS-3012 Series User Manual

33.7 Example no Commands

These are the commonly used command examples that belong to the "no" group of
commands.

33.7.1 no mirror-port

Syntax:
no mirror-port
Disables port mirroring on the switch. An example is shown next.

Figure 141 no mirror-port Command Example

sysname(config)# no mirror-port

33.7.2 no trunk

Syntax:
<T1|T2|T3|T4|T5|T6>
no trunk
no trunk <T1|T2|T3|T4|T5|T6> lacp
<T1|T2|T3|T4|T5|T6> interface <port-list>
no trunk
where
An example is shown next.
• Disable trunk one (T1).
• Disable LAPC on trunk three (T3).
• Remove ports one, three, four and five from trunk five (T5).

Figure 142 no trunk Command Example

sysname(config)# no trunk T1
sysname(config)# no trunk T3 lacp
sysname(config)# no trunk T5 interface 1,3-5
GS-3012/GS-3012F User's Guide
<T1|T2|T3|T4|T5|T6>
<T1|T2|T3|T4|T5|T6> lacp
<T1|T2|T3|T4|T5|T6>
interface <port-list>
Chapter 33 Command Examples
Disables the trunk group.
Disables LACP in the trunk group.
Removes ports from the trunk group.
247