Installing The Spinner - Seagull Models TWIN COMANCHE SEA134 Assembly Manual

TWIN COMANCHE
Blind nut.
Electric motor.
150mm.
Balsa stick.
4) Attach the speed control to the side of the
motor box using two-sided tape and tie wraps.
Connect the appropriate leads from the speed
control to the motor. Make sure the leads will
not interfere with the operation of the motor.
24
M4 x 15mm.
Epoxy.
Instruction Manual.
Speed control.
Battery

INSTALLING THE SPINNER.

Install the spinner backplate, propeller and
spinner cone.
The propeller should not touch any part
of the spinner cone. If it does, use a
sharp modeling knife and carefully trim away
the spinner cone where the propeller comes
in contact with it.