TWIN COMANCHE
M3x15mm.
4.
M2 clevis.
6) Install the wheel wells after adjusting the
retracts. Roughen the bottom side of the well
and glue the wells using C/A glue as shown.
1.
7) Install the gear door to the retract strut.
Apply a thin epoxy to the two gear door brack-
ets to secure the gear door to the retract strut
as shown.
8.
28
M2 lock nut.
7.
Instruction Manual.
5.
C/A glue.
3.
Epoxy.
3.
6.
8.