Seagull Models TWIN COMANCHE SEA134 Assembly Manual page 20

TWIN COMANCHE
M3x10mm.
Epoxy.
20
Instruction Manual.
+ ENGINE .72- .82 : 4 STROKE.
1) Slide the pushrod tube in the firewall and
guide it through the fuel tank mount. Use
medium C/A to glue the tube to the firewall and
the fuel tank mount.
2) Connect the Z-bend in the 450mm throttle
pushrod to the outer hole of the carburetor arm.
3) Slide the throttle pushrod wire into the tube.
Position the engine between the mounts. Use
four M4x25mm machine screws to secure the
engine to the mount as shown.
Machine screw M4x25mm.
Pushrod wire.
4) Reinstall the servo horn by sliding the
connector over the pushrod wire. Center the
throttle stick and trim and install the servo horn
perpendicular to the servo center line.