Engine Mount Installation - Seagull Models TWIN COMANCHE SEA134 Assembly Manual

TWIN COMANCHE
INSTALLING THE FLAP PUSHROD.
Repeat the procedure for the aileron pushrod.
M2 lock nut.
Wing.

ENGINE MOUNT INSTALLATION.

1) Locate the items necessary to install the
engine mount included with your model.
4x20mm.
2) Use four 4x20mm head bolts and four 4mm
washers to attach the engine mount rails to
the firewall. Tighten the screws . Make sure to
use threadlock on the screws to help prevent
them from vibrating loose.
14
Repeat the procedure for the other aileron servo.
Flap.
+ ENGINE .46- .55 : 2 STROKE.
1) Position the engine with the drive washer
(118mm) forward of the firewall as shown.
Instruction Manual.
118mm.