Seagull Models TWIN COMANCHE SEA134 Assembly Manual page 27

Repeat the procedure for the other wing.
INSTALLING RETRACTABLE
LANDING GEAR (OPTIONAL).
1) Locate the items necessary to install the
retracts landing gear and retract linkage instal-
lation (excluded).
6
3
5
2
200mm.
220mm.
2) Cut the covering from the bottom of the
wing for retracts landing gear installation.
www.seagullmodels.com
1
4
7
3) Glue hardwood mounting blocks into the
wing as show with epoxy.
Epoxy.
4) Position the landing gear onto the landing
gear rails. Mark the location of the holes for
mouting the landing gear.
1.
4.
2.
5) Install the linkage into the connector on the
end of the retract unit as shown. Mounting the
landing gear to the rail with four M3x 15mm.
Cut.
2.
27