Installing A Dvd Drive; Figure 3-22. Dvd Drive Installation - HP 9000 rp3410 User's & Service Manual

Installing a DVD Drive

Install a DVD drive behind the front bezel.
Ensure that the server is powered off and all power sources have been disconnected
WARNING
from the server before removing or replacing a removable media drive.
Voltages are present at various locations within the server whenever an ac power
source is connected. This voltage is present even when the main power switch is in
the off position.
Failure to observe this warning can result in personal injury or damage to
equipment.
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
CAUTION
safety precautions can result in damage to the server. Failure to properly complete the steps in
this procedure will result in erratic server behavior or system failure. For assistance with this
procedure contact your local HP Authorized Service Provider.
Figure 3-22 DVD Drive Installation
Chapter 3
Installing the System
Installing Additional Components
77