Replacing The System Board; Figure 6-68 Align The System Board Pci Connector - HP 9000 rp3410 User's & Service Manual

Replacing the System Board

Step 1. Grasp the new system board by its edges and carefully align it in the server:
a. Angle the board to enable the PCI connector to slide into the PCI card cage bay area.
b. Align the system board keyholes with their standoffs on the chassis.
c. Slide the PCI connector posts on the system board into their slots on the server chassis.

Figure 6-68 Align the System Board PCI Connector

Chapter 6
Removing and Replacing Components
Removing and Replacing the System Board
217