Removing The Power Supply; Figure 6-19 Releasing The Power Supply Retaining Clip - HP 9000 rp3410 User's & Service Manual

Removing and Replacing Components
Removing and Replacing the Power Supply

Removing the Power Supply

To remove the power supply, follow these steps:
Step 1. Remove the front bezel from the server. (See "Removing and Replacing Server Covers and Bezel" on
page 151.)
Step 2. Press the power supply retaining clip to unlatch the power supply release lever.

Figure 6-19 Releasing the Power Supply Retaining Clip

164
Power Supply 2
Power Supply 1
Chapter 6