Exit Menu - Santec SDVR-9/X-S User Manual

3. DEFAULT SETTING PASSWORD:
If you want to execute the default setting, shift the focus to this item and enter. Instantly the
screen shows the following entry:
ENTER NEW DEFAULT PASSWORD:
RE - ENTER DEFAULT PASSWORD:
After setting the password, when you enter the DEFAULT SETTING the next time, a text will
show saying "PASSWORD: _ _ _ _". Please type in the correct password to enter in the
DEFAULT SETTING.
4. REFORMAT PASSWORD:
This option allows you to set a password to block any unauthorized entry in formatting a hard
disk or SD card.
ENTER NEW REFORMAT PASSWORD:
RE - ENTER REFORMAT PASSWORD:
After setting the password, when you want to format the HDDs, the message of "PASSWORD:
_ _ _ _"will appear. Please type in the correct password to start to format.
5. RETURN:
Go back to the previous page.
NOTE: After typing and re-typing the password, a message of "PASSWORD ENTER SUCCESS"
shows up. Please exit the menu with saving.
If you want to change the password, you must enter the old default password, then type in the new
one twice.

5.9 EXIT MENU

If you wish to exit the menu, focus on this item and enter.
MAIN MENU
1 QUICK SETTING:
2 DISPLAY OPTION:
3 SEQUENCE SETTING:
4 PICTURE ADJUST:
5 OPERATION LOG:
6 ADVANCED SETTING:
7 DEFAULT SETTING:
8 PASSWORD SETTING:
9 EXIT MENU:
enter: select
▲/▼/jog/ch1~9: item
1. EXIT MENU WITHOUT SAVING:
Enter to exit at once without saving any settings.
2. EXIT AFTER SAVING:
Save your settings and exit.
3. RETURN:
Go back to the previous page.
Type in your selected new default password in a 4-digit number.
Re - type your new default password in order to check it.
Type in the 4-digit password you choose.
Re - type your advanced password in order to check it.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
EXIT MENU
1 EXIT MENU WITH SAVING:
2 EXIT WITHOUT SAVING:
RETURN
menu: exit
enter: select
▲ /▼ /jog/ch1~2: item
56
ENTER
ENTER