Quick Setting - Santec SDVR-9/X-S User Manual

5.1 QUICK SETTING

This page enables you to rapidly install your desired setting. For more detailed changes, enter each item
page.
MAIN MENU
1 QUICK SETTING:
2 DISPLAY OPTION:
3 SEQUENCE SETTING:
4 PICTURE ADJUST:
5 OPERATION LOG:
6 ADVANCED SETTING:
7 DEFAULT SETTING:
8 PASSWORD SETTING:
9 EXIT MENU:
enter: select
▲ /▼ /jog/ch1~9: item
1. TIME SETTING:
You can set the system time here.
2. DATE SETTING:
Records the system date.
3. TITLE SETTING:
Fixes a desired title within 9 characters. After entering this page you can choose any particular
channel's title and use the shuttle to make any changes.
For example, you can fix channel 1 from the default setting"CH1" to "CH1<EXIT>".
4. NORMAL RECORD RATE:
Select this item and use the shuttle to adjust your recording rate out of our available rate range
from 0 to 60(NTSC), or 0 to 50(PAL). If you choose a speed rate, your selected recording rate will
be divided proportionally between the numbers of channels you use.
5. RECORD QUALITY:
Enter and choose each channel's quality out of a quality range from "BEST", "HIGH", and
"STANDARD" to "BASIC".
6. DISK FULL:
This option determines the way to utilize storage media in case of a full disk.
REWRITE: When the hard disk is full, the device continues recording by displacing the old data.
STOP: When the hard disk is full, the device will stop recording.
NOTE: Please press the " STOP" or "DISPLAY" buttons to erase the beeping sound.
7. RETURN:
Choose this item and press the Enter button to go back to the previous page.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
38
QUICK SETTING
1 TIME SETTING:
2 DATE SETTING:
3 TITLE SETTING:
4 NORMAL RECORD RATE: 30 F/S
5 RECORD QUALITY:
6 DISK FULL:
RETURN
menu: exit
enter: select
shuttle: value
◄/►/ jog: move
▲ /▼ /jog/ch1~6: item
18:54:47 PM
04/29/2004
ENTER
ENTER
REWRITE