Appendix 2. - How To - Santec SDVR-9/X-S User Manual

APPENDIX 2. – How to
This chapter provides the beginner the basic function settings.
1. How to set motion detection
Scheduled or continuous video recording by all cameras, or selected cameras set to activate to motion
detection. User may select specific area of coverage to be recorded.
Quick setting:
(please follow the "→ " sign to the next step.)
MAIN MENU → ADVANCED SETTING → ALARM SETTING → ALARM INPUT LINK→ to choose the
channels as you want turn the
OUT1, 2 or 3 as you want → turn the
WITH SAVING
►SET THE MOTION DETECTION
(1) Press the menu button to enter the MAIN MENU.
(2) Select the ADVANCED SETTING and press the enter button to enter the ADVANCED SETTING page.
(3) Select MOTION SETTING and press the enter button to select channel.
(4) Press the enter button to enter the MOTION SETTING page for each channel.
(5) Set the TARGET ZONE of each channel.
MANUAL: The user can use the manual way to set the target area. Use the "call" button + "^", "v", "<"
or ">" to mark the starting point A, and the "seq." button + "^", "v", "<" or ">" to mark the ending point B.
AUTO: The user must move in front of the cameras, so that the DVR can detect the motion and fix that
area as the motion area automatically. The area will be the target zone.
(6) Exit the menu with saving.
2. How to set the communication
This section outlines how to network the DVRs by LAN over the Internet to a remote pc.
Quick setting:
MAIN MENU → ADVANCED SETTING → OPERATION LOCK → NETWORK LOCK → turn the
to set it OFF → EXIT MENU → EXIT MENU WITH SAVING
►
Configure the Ethernet communication settings
(1) Press the menu button to enter the MAIN MENU.
(2) Select the ADVANCED SETTING and press the enter button to enter the ADVANCED SETTING page.
(3) Select COMMUNICATION and press the enter button to enter the COMMUNICATION page.
(4) Select NET SETTING and press the enter button to enter the NET SETTING page.
○ , means press the "menu" button; ○ ,
m
○ , means press the ">" (right) button; ○ ,
>
× 1 means press the button once, × 2 means twice, × 3 means thrice, and so on.
to set the motion ON → ALARM OUT LINK → choose ALARM
to set the MOTION YES → EXIT MENU → EXIT MENU
64
means press the "enter" button.
e
means press the "v" (down) button.
v