Advanced Setting; Alarm Setting - Santec SDVR-9/X-S User Manual

5.6 ADVANCED SETTING

This page includes multiple special functions.
MAIN MENU
1 QUICK SETTING:
2 DISPLAY OPTION:
3 SEQUENCE SETTING:
4 PICTURE ADJUST:
5 OPERATION LOG:
6 ADVANCED SETTING:
7 DEFAULT SETTING:
8 PASSWORD SETTING:
9 EXIT MENU:
enter: select
▲ /▼ /jog/ch1~9: item

5.6.1 ALARM SETTING

This page enables you to set all the various alarm - related functions. The device will record as long as
the alarm is activating.
ADVANCED SETTING
1 ALARM SETTING:
2 RECORD SETTING:
3 MOTION SETTING:
4 CAMERA COVER:
5 OPERATION LOCK:
6 COMMUNICATION:
7 DISK SETUP:
8 SCHEDULE:
RETURN
menu: exit
enter: select
▲ /▼ /jog/ch1~8: item
1. ALARM DURATION:
Set the desired time period. The options range from "TRANSPARENT" to "NONSTOP", from one
second to 60 minutes.
NOTE: Please give the time frame either in seconds or in minutes – not in both.
2. DISK - FULL ALERT:
This signals a disk is fully recorded. The options are "ON' and "OFF".
ON: Enables the function.
OFF: Disables the function.
3. PREALARM:
This option determines that images prior to an alarm will be recorded in the hard- disk drive. When
an alarm is triggered the device will record the images prior to the alarm for 10 seconds.
ON: Enables the function.
OFF: Disables the function.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
44
ADVANCED SETTING
1 ALARM SETTING:
2 RECORD SETTING:
3 MOTION SETTING:
4 CAMERA COVER:
5 OPERATION LOCK:
6 COMMUNICATION:
7 DISK SETUP:
8 SCHEDULE:
RETURN
menu: exit
enter: select
▲ /▼ /jog/ch1~8: item
ALARM SETTING
1 ALARM DURATION:
2 DISK FULL ALERT:
3 PREALARM:
4 ALARM RECORD RATE:
5 ALARM RECORD MODE:
6 ALARM RECORD QUALITY: ENTER
7 SENSOR TYPE:
8 ALARM INPUT LINK:
9 ALARM OUT LINK:
RETURN
menu: exit
enter: select
shuttle: value
▲ /▼ /jog/ch1~9: item
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
30 SEC
ON
OFF
60 F/S
ENTER
ENTER
ENTER
ENTER