Installation; Basic Connection; Hard-Disk Drive Installation - Santec SDVR-9/X-S User Manual

3. INSTALLATION

Please follow the instructions and the diagram below to set up the system.

3.1 Basic Connection

CONNECTING WITH 1 to 9 CAMERAS

3.2 Hard-Disk Drive Installation

The 9CH DVR is equipped with two compartments of hard-disk drives and a DVD-RW drive (FOR THE
DVD-ROM MODEL ONLY). The unit usually comes with one hard-disk drive installed in the
compartment HD1, which is default-configured as a master. If you need a second hard-disk drive to be
installed in the compartment HD2. Please contact your distributors or installers for specific instructions
on how to install it. Please don't try this before consulting your installers. Serial ATA (SATA) interface
disk drives are designed for easy installation. It is not necessary to set any jumpers, terminators, or
other settings on this drive for proper operation. The compatible hard-disk drives (Table 3.2), which can
be used with the unit, are shown in the tables below.
NOTE: There are three compartments of hard-disk drives in the REMOVABLE HDD MODEL. If there is
only one hard-disk drive in the mobile compartment, please set the HDD3 USAGE option to REC
(please refer to section 4.4) before proceeding with the recording function.
Table 3.2 Compatible hard-disk drives
Manufacturer
Seagate
Model
ST380815AS
ST3160815AS
ST3250410AS
ST3320620AS
ST3500630AS
ST3750640AS
ST3160815SV
ST3250820SV
ST3320620SV
ST3500630SV
ST3750640SV
ST3250620NS/P
ST3320620NS/P
ST3500630NS/P
ST3750640NS/P
14
Capacity Rotation
80G 7200 RPM
160G 7200 RPM
250G 7200 RPM
320G 7200 RPM
500G 7200 RPM
750G 7200 RPM
160G 7200 RPM
250G 7200 RPM
320G 7200 RPM
400G 7200 RPM
750G 7200 RPM
250G 7200 RPM
320G 7200 RPM
500G 7200 RPM
750G 7200 RPM
Cache
8MB
8MB
16MB
16MB
16MB
16MB
8MB
8MB
16MB
16MB
16MB
16MB
16MB
16MB
16MB