Santec SDVR-9/X-S User Manual page 51

4. GATEWAY: When setting the DHCP item to OFF, the gateway may be manually edited.
5. DNS ADDRESS: The DNS IP address may be manually edited.
6. HTTP PORT: The HTTP PORT allows users to set the HTTP port number from 1 to
65535.
NOTE: The items 2-6 are used to configure the Ethernet communication settings. This is
required for the purpose of making a network connection. Please consult with a qualified
MIS professional to configure it.
NOTE: When only one unit of the DVR is connected to a computer or LAN, you can freely
assign an IP address for the DVR. For example, there is a range of DVR IP addresses from
192.168.1.1 to 192.168.1.255. You can pick one for use from the range of the IP. It's not
necessary to set MASK and GATEWAY; leave the settings as default.
When a DVR is connected to a WAN, you must acquire a unique, permanent IP address
and correctly configure the MASK and GATEWAY settings according to your network
architecture. If you have any questions regarding those settings, please contact a qualified
MIS professional or your ISP.
NOTE: When connecting to a network, each connected DVR must be assigned a unique IP,
which must be in the same class type as your network address. IP addresses are written as
four sets of numbers separated by periods; for example, 192.168.1.1 Therefore, if the
connected network is identified as Class C, for example, the first three sets of numbers of
the DVR IP address must be the same as the network address. If the connected network is
identified as Class B, the first two sets of numbers of the DVR IP address must be the same
as the network address. If you have any questions regarding these settings, please contact
a qualified MIS professional or your ISP.
7. DEVICE NAME: The default device name is DVR.
8. LIVE RESOLUTION: After accessing the DVR via the Microsoft Internet Explorer, it
HALF D1: The maximum video capture resolution is 720 x 240 pixels (NTSC) or
720 x 288 pixels (PAL).
CIF: The maximum video capture resolution of NTSC is 352x240 pixels, and the
resolution of PAL is 352x288 pixels.
QCIF: Quarter CIF. The maximum video capture resolution of NTSC is 160x120
pixels, and the resolution of PAL is 160x144 pixels.
9. USER SETTING: When accessing the DVR via the Microsoft Internet Explorer, users
have to login by entering the user name and password. The user who accesses
with the admin name and password has the full power to even change the settings
of the DVR (please refer to section 7. for more details). However, a user who
accesses with just the viewer name and password has only the limited power to
view.
ADMIN NAME: The default admin name is ADMIN.
ADMIN PASSWORD: The default admin password is 9999.
VIEWER NAME: The default viewer name is VIEWER.
VIEWER PASSWORD: The default viewer name is 0000.
10. DDNS SETTING: DDNS（dynamic domain name system） is a function which is
DDNS MODE: Activate ON or OFF. This option enables or disables the DDNS
HOST NAME: The default host name is www.dvr.com.
USER NAME: The default user name is guest.
PASSWORD: The default password is 0000.
4. RETURN: Go back to the previous page.
allows you to see 3 modes of live images via your PC screen.
provided by an American company. Please refer to www.dyndns.com.
function.
51