Santec SDVR-9/X-S User Manual page 10

freeze button:
20
Press to freeze an image in the live or play mode.
NOTE: During the play mode, pressing the "freeze" and the "pause" buttons have different
effects. Push "freeze" to capture a particular image while the image record
continues running in the device. When you press the "pause" button, both the
particular image and the entire image record are halted.
search button:
21
Press to enter the search mode to access recorded video.
(zoom) button:
22
Press to double the size of an image. Use the "^" ( up ), "V" ( down ) , "<" ( left ) and ">" ( right )
buttons to shift your zoom focus . Press the zoom button again to return to the original image size.
channel button:
23
All channel buttons from 1 to 9 are sited here. Press each to display its channel in the live and play
modes.
LOCK Indicator:
24
The red signal denotes an operation lock.
T-rec Indicator:
25
This indicator of the timer recording mode lights up to signal the scheduled record setting is on.
(DISK) Indicator:
26
The indicator shows the operation status of the unit's hard-disk drives. The green light indicates
the hard-disk drive is storing or retrieving data. The red light signals the hard-disk drive is filling up.
The orange light indicates the hard-disk is retrieving at disk-full status.
POWER button:
27
Press this button for at least 3 seconds to switch off. Press again to activate the device.
SD CARD Slot:
28
This is used for system software updating, archiving/accessing critical images, and to save the
whole setting.
10