Backup Operations; Mobile Rack Hd Backup Operations - Santec SDVR-9/X-S User Manual

4.4 Backup Operations

4.4.1 Mobile Rack HD Backup Operations

There are three ways available to duplicate the recorded video from HDD1 and HDD2 (Fixed HDs)
in HDD3 (the Mobile Rack HD). Please take the following steps to proceed.
(1) Set HDD3 to BACKUP first. Take the following steps.

Press the menu button

Highlight ADVANCED SETTING and press the Enter button
SETTING page.

Select the DISK SETUP and press the Enter button

Then set HD 3 USAGE to BACKUP HD.
ADVANCED SETTING
1 ALARM SETTING:
2 RECORD SETTING:
3 MOTION SETTING:
4 CAMERA COVER:
5 OPERATION LOCK:
6 COMMUNICATION:
7 DISK SETUP:
8 SCHEDULE:
RETURN
menu: exit
enter: select
▲ /▼ /jog/ch1~8: item
(2) Backup to HD3.

Press the "Search" button and enter the SEARCH page.

Move the focus to BACKUP and enter the BACKUP MENU page.

Set the DATE, TIME and DURATION in the menu. Adjust the shuttle to set the desired
values in the entries; the maximum value for DURATION is 72 hours 59 minutes.

After you set the DATE, TIME and DURATION, select START BACKUP.

Commence the backup function; the red signal on the screen shows the HDD3 is
functioning.

Press the STOP button to end the backup function.

Press the search button to exit the mode (to survey the live images) and press the
search button again to return to the BACKUP MENU mode (to check the BACKUP
mode information). This process can continue until you finish the backup function or
push the STOP button.
to enter the MAIN MENU page.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
31
to enter the ADVANCED
to enter the DISK SETUP page
DISK SETUP
1 DISK FULL:
2 DAYS TO KEEP DATA IN HDD: NO ERASE
3 HDD1 REFORMAT:
4 HDD2 REFORMAT:
5 HDD3 REFORMAT:
6 SD CARD REFORMAT:
8 HDD3 USAGE:
RETURN
HD1 MODEL: ST320014A
HD2 MODEL:
HD3 MODEL:
menu: exit
shuttle: value
▲/▼/jog/ch1~8: item
REWRITE
ENTER
ENTER
ENTER
ENTER
BACKUP HD