Santec SDVR-9/X-S User Manual page 66

(9) Set the scheduled alarm setting during the scheduled time. Then press the enter button to enable the
setting.
(10) Exit the menu with saving.
4. How to format a HDD
Please take the following steps to format a HDD.
QUICK SETTING:
Format HDD1:
MAIN MENU → ADVANCED SETTING → DISK SETUP → HDD1 FORMAT → press CH9 button 4
times
Format HDD2:
MAIN MENU → ADVANCED SETTING → DISK SETUP → HDD2 FORMAT → press CH9 button 4
times
Format HDD3:
MAIN MENU → ADVANCED SETTING → DISK SETUP → HDD3 FORMAT → press CH9 button 4
times
5. How to set a call monitor
This BNC connector provides video signals to call monitor to display any selected camera in full-screen
call up, sequential display and alarm call up operations.
QUICK SETTING:
MAIN MENU → ADVANCED SETTING → ALARM SETTING → ALARM OUT LINK →
DISPLAY(CALL MONITOR) → set SENSOR, V-LOSS or MOTION to YES → EXIT MENU → EXIT
MENU WITH SAVING
TITLE DISPLAY:
QUICK SETTING:
MAIN MENU → DISPLAY OPTION → CALL MONITOR DISPLAY → turn the
DISPLAY ON → turn the
DISPLAY ON → EXIT MENU → EXIT MENU WITH SAVING
to set the DATE DISPLAY ON → turn the
66
to set the TIME
to set the TITLE