Table of Contents
Advertisement
User manual SanStore-4EM / SanStore-8EM
6. OPERATION
6.1 Main menu overview
After switching on the recorder, the live picture appears on the screen after approx. 30
seconds. Press the [MENU] button to access the main menu. A window pops up and you are
prompted for the "admin" password. Enter it by using the numeric buttons on the remote
control or by using the keys on the recorder front panel (default factory password: 000000).
Once the correct password is entered, the main menu appears.
Note:
The factory default password is "000000". It is recommended to change the password upon
installation.
Procedure:
Use the direction buttons [
menu are highlighted with an arrow.
Press [ENTER] to confirm your selection and to access the sub-menu. Use the
left/right buttons [
Press the [MENU] button to exit a menu with saving changes.
Press the [CANCEL] button to exit a menu without saving the changes.
_________________________________________________________________________________
] to select the desired menu. Items selected in the
] to select a tab menu. Selected items change to bold.
selected
not selected
- 23 -
Advertisement
Table of Contents
