Santec SDVR-9/X-S User Manual page 60

● Alarm:
The upper part of the window enables you to set the "Duration", "Disk Full", "PreAlarm", and "Frame
Rate" of the alarm for the device. The bottom part of the window helps you set each channel's settings
in the event of an alarm. Set "Select Channel", "Record Mode", "Quality", "Sensor Type", "Sensor
Sensitivity", "Sensor Output", "Video Loss Output", and "Motion Output" for each channel. Click
"Submit" to set your changes. Click the "Alarm Output Setting" to enter the "Alarm Output Setting" page
and set the detail items of alarm output. Click "Submit" after each setting.
● Record:
Click "Record" to enter the "Record Setting" page. In the upper part of the window you can set the
device's "Disk Full", "Frame Rate", "Audio Rate" and "Audio Channel" entries. In the lower part of the
window set each channel's "Select Channel" and "Quality". Click "Submit" after each setting.
60