Calling Up The Menu Tool Bar - Santec DSR-2504H User Manual

Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H
7. Calling-up the menu tool bar
Right-click or press the ESC key on the recorder front panel to call-up the menu tool bar
appearing at the bottom of the screen:
Function menu:
Click on this symbol to call-up the main menu. Alternatively, you can call-up the main menu
by pressing the menu key on the recorder front panel or the menu key on the remote control.
The main menu functions are described in detail in the following chapter.
Screen mode:
Click on the desired screen mode (full screen or split screen). If you click on the little triangle
icon next to the symbol, you can choose the channel.
PIP (picture-in-picture):
Click on this symbol to select a channel. Then click on „None" to select another channel. You
will get a picture-in-picture view.
Dwell:
The live images of different cameras are displayed as a sequence, either as a single channel
or in a grid fashion.
If the video image is displayed as full screen after a detected event (e.g. alarm), you can use
the dwell function to return to the multiple view.
Color:
Click on this symbol to adjust the colour of the live image.
E-Zoom:
Zoom the image of the selected channel.
Volume:
Adjusting the volume.
PTZ:
Setting the pan/tilt/zoom position, speed and auto scan.
Snap:
Click on this symbol to make a snapshot of the live image. This snapshot is stored by default
on the recorder HDD.
Record:
Click on this symbol to manually start and stop the recording.
_________________________________________________________________________________
- 93 -