Quick Start; Getting Started - Santec SCVR-2411K User Manual

User manual
SCVR-2411K, SCVR-2411TK, SCVR-2812TK

3. Quick start

3.1 Getting started

Connect the mouse, the monitor, the network cable and the camera(s) with the
recorder (notes on camera see chapter 4).
Connect the monitor and the camera to power by using the power adapters supplied
with these devices
Finally, connect the recorder to power by using the supplied power adapter.
For models SCVR-2411K and SCVR-2411TK:
The recorder switches on automatically as soon as it is connect to power. During this
phase a beep sounds.
For model SCVR-2812TK:
Use the power on/off button on the recorder rear to switch the recorder on.
The LED indicator in the recorder front lights up.
Depending on the settings, the live image of the camera(s) or the Startup Wizard is
displayed (the Startup Wizard can be set here (see chapter 7.5.5.1):
Main menu  Setting  System  General  Startup Wizard
o Startup Wizard:
Click on „Next Step" or „Cancel" to go to the login page.
o Live image:
Left-click in the live image. The login window pops up.
_________________________________________________________________________________
- 11 -